Scatterbrain

Designed as a lightweight outdoor endurance plane, this model has finished in the top 5 in Old Time Rubber contests. Removable wing, similar to "Miss World's Fair". Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.

This free flight rubber powered kit contains a full-size rolled plan, hand-picked printed balsa and balsa strip wood, rubber motor, E-B propeller, EBM thrust bearing, clear plastic for the windshield, wheels, wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.

CUSTOMER BUILDS & INFO

"Dave, a photo of the finished model is attached. I test flew it today. On its first full power flight, 1,000 turns, six strands of 1/8, it was OOS at ten minutes. Luckily, I went down the bearing and found it about a mile away. Now I'm going to put a DT on it! " - Grant Carson

 

  

 

"These are the pictures of the Scatterbrain, it was a lot of fun to build and very different looking. I now have it almost trimmed out. It is super stable and if it hits turbulence it really corrects itself super fast. I am flying it with 6 strands of 1/8, 17" long." - Mike Breen